Quick Rail
The Quick
Rail System has a unique Tri-layered Composite formula
that offers top quality. It provides thicker walls,
greater stiffness, and rigidity with less weight. It is
ideal for harsh outdoor weather conditions and is
virtually maintenance-free. The QuickRail system is easy
to install, UV protected and comes in a vibrant white
that never needs to be painted.
Stair Rail Kit
For stair
and step applications, purchase 6' QuickRail Stair Rail
Kits. Each kit includes every component needed for
installation, including a sloped bracket set to
accommodate the angular application. For commercial use
or where applicable, it may be necessary to install a
handrail that meets specific code requirements. Check
with local code officials for the requirement in your
area.
The Quick Rail System
-
Fastest and easiest installation (approx. 7 minutes for a standard 8' rail section)
-
Prepackaged kits make job site application simple
-
Easy pre-mortised rail to baluster fit
-
The only code certified vinyl rail system on the market (SBCCI 9850A)
-
Stair Applications - Sloped Brackets are only available in the QuickRail System
-
Lifetime warranty assures quality
-
Never Needs Painting
-
More options in any other system on the market to fit all applications
Balusters in 32 1/2" and 38 1/2" are available for
finished top rail heights of 36" and 42". Consult
local building code requirements for interpretation
of your specific application.
Rail
Lengths
|
Nominal |
Spaced for Colonial Baluster
(Actual Rail Lengths) |
Spaced for Square Baluster
(Actual Rail Lengths) |
|
6' Top
& Bottom Rails |
70
1/2" |
72"
|
|
8' Top
& Bottom Rails |
94
1/8" |
96"
|
Additional lengths are available on a special quote
basis.
Newel
Tops
|
Top Size |
Ball Top Inside Dimension |
Gothic Top Inside Dimension |
Taper Top Inside Dimension |
|
4.00"
|
4.03"
x 4.03" |
4.05"
x 4.05" |
4.03"
x 4.03" |
|
5.00"
|
5.01"
x 5.01" |
5.02"
x 5.02" |
5.01"
x 5.01" |
| |
 |
 |
 |
Newel
Sleeves
A newel sleeve is designed to serve as a sleeve as a
sleeve over a structural member.
|
|
4" Newel |
5" Newel |
|
Inside
Dimension |
3 5/8"
x 3 5/8" |
4 5/8"
x 4 5/8" |
|
Outside Dimension |
4" x
4" |
5" x
5" |
|
Additional lengths are available on a special
quote basis |
38" in
length for 36" Handrail heights
44" in length for 42" Handrail heights
|
Balusters
|
|
Colonial |
|
For
36" Handrail Heights |
1 1/2"
x 1 1/2" x 32 1/2" |
|
For
42" Handrail Heights |
Available Soon |
14
Balusters per 6' Section
19 Balusters per 8' Section |
|
|
Square |
|
For
36" Handrail Heights |
1 1/2"
x 1 1/2" x 32 1/2" |
|
For
42" Handrail Heights |
1 1/2"
x 1 1/2" x 38 1/2" |
13
Balusters per 6' Section
17 Balusters per 8' Section |
|
Brackets |
Screws & Buttons
|
Curved Bracket Set
(pictured above)
Can be used for round column applications.
Flat Bracket Set
Can be used for newel, square post or flat wall
applications.
Slope Bracket Set
Can be used for stair/step applications.
|
Screws (20 Pack)
Buttons (16 Pack) |
Examples:
 Shown
on the left is QuickRail with Colonial Balusters &
Curved Bracket. Also installed are Dixie-Pacific's
DuraCast Fiberglass Columns with tucsan Cap & Base
Sets.
 An
example of a QuickRail Stair Rail Kit Square
Balusters and Sloped Brackets. Also shown is a 4"
Newel Sleeve and a 4" Taper Top (available as
accessories).
Lifetime Warranty
WorthingtonMillwork warrants the QuickRail to be free from defects in material and workmanship. Provided the rail has been properly installed, WorthingtonMillwork will replace or repair, at is option, the rail system that failed as a result of defective material or workmanship.
The warranty does not cover labor or any failures resulting from alterations to the product after purchase.
This warranty applies to the original owner of the structure to which QuickRail is attached and terminates upon sale of the structure.
|
